2011-2013 Faculty Publications

J.-C. Wang and A.I. Liapis, Molecular-based modeling and simulation studies of water–water and water–macromolecule interactions in food and their effects in food dehydration. Advances in Food Process Engineering Research and Applications, S. Yanniotis, P. Taoukis, N. G. Stoforos, and V. T. Karathanos (Eds.), Springer, November 4, 2013.

Shaikh, A. and Al-Dahhan, M. Scale-¿up of bubble column reactors: A review of current state-¿of-¿the-¿art. Ind & Eng. Chem.Res. (2013), 52, 8091-8108. 

Shaikh, A. and Al-Dahhan, M. A new method for online flow regime monitoring in bubble column reactors via nuclear gauge densitometry. Chem. Eng. Sci. (2013), 89, 120-132.

Youssef, A. A.; Hamed, M.E.; Grimes, J. T.; Al-Dahhan, M. H.; and Dudukovic, M. P.  Hydrodynamics of pilot-¿scale bubble columns: effect of internals. Ind. & Eng. Chem. Res. (2013), 52, 43-55.

Lee, J.-W. and Forciniti, D. Effect of glycosylation on the partition behavior of a human antibody in aqueous two-¿phase systems. Biotechnology Progress (2013), 29, 943-950.

Gong, Y.; Patel, R.; Liang, X.; Palacio, D.; Song, X.; Goodenough, J.B.; and Huang, K. Atomic Layer Deposition Functionalized Composite SOFC Cathode La0.6Sr0.4Fe0.8Co0.2O3-δ -¿Gd0.2Ce0.8O1.9: Enhanced Long-¿Term Stability.  Chemistry Materials (2013), 25, 4224-4231.

Shang, Z.; Patel, R.; Evanko, B.W.; and Liang, X. Encapsulation of supported metal nanoparticles with an ultra-¿thin porous shell for size-¿selective reactions. Chemical Communications (Cambridge, United Kingdom) (2013), 49, 10067-10069.

Gong, Y.; Palacio, D.; Song, X.; Patel, R.; Liang, X.; Zhao, X.; Goodenough, J. B.; and Huang, K.  Stabilizing Nanostructured Solid Oxide Fuel Cell Cathode with Atomic Layer Deposition. Nano Letters (2013), 13, 4340-4345.

Muhich, C. L.; Evanko, B. W.; Weston, K. C.; Lichty, P.; Liang, X.; Martinek, J.; Musgrave, C. B.; and Weimer, A. W. Efficient Generation of H2 by Splitting Water with an Isothermal Redox Cycle.  Science (Washington, DC, United States) (2013), 341, 540-542.

Liang, X.; Evanko, B. W.; Izar, A.; King, D.M.; Jiang, Y.-B.; and Weimer, A. W. Ultrathin highly porous alumina films prepared by alucone ABC molecular layer deposition (MLD). Microporous and Mesoporous Materials (2013), 168, 178-182.

Li, M. and Liapis, A. I. Adsorption in columns packed with porous adsorbent particles having partially fractal structures. Journal of Separation Science (2013), 36, 1913-1924.

Al-Shareef, A.;, Neogi, P.; and Bai, B. (2013) Force based dynamic contact angles and wetting kinetics on a Wilhelmy plate. Chemical Engineering Science (2013), 99, 113-117.

Jain, R.; Forciniti, D. Adsorption of diblock polypeptides on polystyrene latex. Langmuir (2012), 28(43), 15323-15335.

Liang, X.; Lyon, L. B.; Jiang, Y.-B.; Weimer, A. W. Scalable synthesis of palladium nanoparticle catalysts by atomic layer deposition. J. Nanoparticle Res. (2012), 14(6), 943, 12 pp.

Arifin, D.; Aston, V. J.; Liang, X.; McDaniel, A. H.; Weimer, A. W. CoFe2O4 on a porous Al2O3 nanostructure for solar thermochemical CO2 splitting. Energy & Environmental Sci. (2012), 5(11), 9438-9443.

Lichty, P.; Liang, X.; Muhich, C.; Evanko, B.; Bingham, C.; Weimer, A. W. Atomic layer deposited thin film metal oxides for fuel production in a solar cavity reactor. Int. J. Hydrogen Energy (2012), 37(22), 16888-16894.

King, D. M.; Liang, X.; Weimer, A. W. Functionalization of fine particles using atomic and molecular layer deposition. Powder Technology (2012), 221, 13-25.

Liang, X.; Jiang, Y.-B.; Weimer, A. W. Nanocoating zinc alkoxide (zincone) hybrid polymer films on particles using a fluidized bed reactor.  J. Vacuum Science & Technology, A: Vacuum, Surfaces, and Films (2012), 30(1), 01A108/1-01A108/6.

Liang, X.; Li, N.-H.; Weimer, A. W. Template-directed synthesis of porous alumina particles with precise wall thickness control via atomic layer deposition. Microporous and Mesoporous Materials (2012), 149(1), 106-110.

Wang, J.-C.; Liapis, A. I. Design and characterization of asymmetric cross-linked polymer membranes by molecular dynamics modeling and simulations. Procedia Engineering (2012), 44, 173-174.

Park, J.; Mead, D. W.; Denn, M. M. Stochastic simulation of entangled polymeric liquids in fast flows: Microstructure modification. J. Rheology (Melville, NY, United States) (2012), 56(5), 1057-1081.

Li, M.; Liapis, A. I. The dynamic behavior of a stratified column bed packed with porous adsorbent particles having partially fractal structures and a non-uniform ligand density distribution. Journal of Separation Science (2012), 35(24), 3439-3446.

Riccardi, E.; Wang, J.-C.; Liapis, A. I. Molecular modeling of polymeric adsorbent media: The effects of counter-ions on ligand immobilization and pore structure. Journal of Separation Science (2012), 35(22), 3073-3083.

Youssef, A. A.; Hamed, M.; Grimes, J. T.; Al-Dahhan, M. H.; Dudukovic, M. Hydrodynamics of pilot scale bubble columns: Effect of internals. Industrial & Engineering Chemistry Research (2012), 52(1), 43-55.

Nedeltchev, S.; Ahmed, F.; Al-Dahhan, M. A new method for flow regime identification in a fluidized bed based on gamma-ray densitometry and information entropy. Journal of Chemical Engineering of Japan (2012), 45(3), 197-205.

Kong, L.-N.; Li, W.; Han, L.-C.; Liu, Y.-J.; Luo, H.-A.; Al-Dahhan, M.; Dudukovic, M. P. On the measurement of gas holdup distribution near the region of impeller in a gas-liquid stirred Rushton tank by means of γ-CT. Chemical Engineering Journal (Amsterdam, Netherlands) (2012), 188, 191-198.

Abdulmohsin, R. S.; Al-Dahhan, M. H. Impact of Internals on the Heat-Transfer Coefficient in a Bubble Column. Industrial & Engineering Chemistry Research (2012), 51(7), 2874-2881.

Lan, X.; Xu, C.; Gao, J.; Al-Dahhan, M. Influence of solid-phase wall boundary condition on CFD simulation of spouted beds. Chemical Engineering Science (2012), 69(1), 419-430.

Wu, C.-T.; Al-Dahhan, M. Heat Transfer Coefficients in Mimicked Fischer-Tropsch Slurry Bubble Columns. Industrial & Engineering Chemistry Research (2012), 51(4), 1543-1548.

Duy, T. T. Q. M.; Neogi, P.; Bai, B. Free volume estimates of thermodynamic and transport properties of heavy oils with CO2. Chemical Engineering Science (2012), 80, 100-108.

Huang, K.; Sasaki, K.; Adzic, R.R.; Xing, Y. Increasing Pt oxygen reduction reaction activity and durability with a carbon-doped TiO2 nanocoating catalyst support. Journal of Materials Chemistry (2012), 22(33), 16824-16832.

Unger, K. K.; Liapis, A. I. Adsorbents and columns in analytical high-performance liquid chromatography: A perspective with regard to development and understanding. Journal of Separation Science (2012), 35(10-11), 1201-1212.

Li, M.; Liapis, A. I. Adsorption in a stratified column bed packed with porous particles having partially fractal structures and a distribution of particle diameters. Journal of Separation Science (2012), 35(8), 947-956.

Wang, J.-C.; Liapis, A. I. Water-water and water-macromolecule interactions in food dehydration and the effects of the pore structures of food on the energetics of the interactions. Journal of Food Engineering (2012), 110(4), 514-524.

Zhang, P.; Henthorn, D. B. Fabrication of pH- or temperature-responsive single wall carbon nanotubes via a graft from photopolymerization, AIChE Journal (2012), 58(10), 2980-2986.

Factor, M.; Lee, S. Quantitative analysis of cloisite 93A infused into linear low-density polyethylene and maleated linear low-density polyethylene in a supercritical carbon dioxide medium, Journal of Applied Polymer Science (2012), 124(4), 3329-3333.

Picou, J.; Wenzel, J.; Niemoeller, A.; Lee, S.; Lanterman, H. B. A Kinetic model based on the sequential reaction mechanism for the noncatalytic reformation of jet fuel in supercritical water. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects (2011), 33(8), 785-794.

Luo, H.-P.; Al-Dahhan, M.H. Airlift column photobioreactors for porphyridium sp.culturing. Part II. Verification of dynamic growth rate model. Biotechnology and Bioengineering (2011), 109(4), 942-949.

Luo, H.-P.; Al-Dahhan, M.H. Airlift column photobioreactors for porphyridium sp.culturing. Part I. Hydrodynamics. irradiance distribution and their impacts, Biotechnology and Bioengineering (2011), 109(4), 932-941.

Luo, H.-P.; Al-Dahhan, M.H. Verification and validation of CFD simulations for local flow dynamics in a draft tube airlift bioreactor. Chemical Engineering Science (2011), 66(5), 907-923.

Abdulmohsin R. S.; Abid, B. A.; Al-Dahhan, M. H. Heat transfer study in a pilot-plant scale bubble column. Chemical Engineering Research and Design J. (2011), 89, 78-84.

Nedeltchev S.; Shaikh, A.; Al-Dahhan, M. H. Flow regime identification in a bubble column via nuclear gauge densitometry and chaos analysis. Chemical Engineering &Technology (2011), 34(2), 225-233.

Liu, Y.-J.; Li, W.; Han, L.-C.; Cao, Y.; Luo, H.-A; Al-Dahhan, M. H.; Dudukovic, M.P. γ-CT measurement and CFD simulation of cross section gas holdup distribution in a gas-liquid stirred standard Rushton tank. Chemical Engineering Science (2011), 66(17), 3721-3731.

Wang, J.-C.;Liapis, A.I.Design of polymeric porous adsorbent media and the dynamic behavior of transport and adsorption of bioactive molecules in such media. Chemie Ingenieur Technik (2011),83(1–2), 152-165.

Neogi, P.; Wang, J.-C. Stability of two-dimensional growth of a packed body of proteins on a solid surface. Langmuir (2011), 27(9), 5347-5353.

Liu, H.; Xing, Y. Influence of Li ions on the oxygen reduction reaction of platinum electrocatalyst. Electrochemistry Communications (2011), 13(6), 646-649.